463-3-8

Epoxy Topcoat

Chemically cured two-component epoxy topcoat.
Contact us
Speak with one of our experts to discuss how we can get the best results for your area of application.
Customer Service Connect with a distributor

Key benefits

  • Exhibits high thermal emittance and low outgassing results when exposed to space environments
  • Commonly used as the protective coating for spacecraft and spacecraft hardware
  • Approved for use by NASA (Spec. 10M01831) and major government subcontractors
  • For use over anodized or conversion coated aluminum surfaces
  • Can also be used on chemically cleaned copper and grit blasted steel or passivated stainless steel surfaces

Downloads

  • Technical Datasheet - 463-3-8

Product Characteristics

Gloss Level N.A
Delivery Method Solventborne
Coverage 12.46 m² per liter ready to apply at 25 µm dry film thickness. 508 ft² per US gallon ready to apply at 1 mil dry film thickness.
Subsegment Commercial Exteriors
Application

OEM/Specifier & Specs Qualified

OEM/Specifier Specs Qualified
Lockheed Martin Aeronautic LMS 70460
USAF MIS MIS-34328

463-3-8 can be used with

This product needs to be used in combination with some of the following products.
Epoxy Primer
10P4-2NF
A chemically cured epoxy primer that provides excellent corrosion and chemical resistance for aircraft detail and subassembly parts. When used as the base primer for specification approved epoxy and polyurethane topcoats, the primer/topcoat system provides the optimum protection for interior structural components. This product has excellent adhesion to a variety of substrates.
OEM/Specifier
  • Boeing
  • Bombardier - Canadair
  • Embraer
  • Israel Aerospace Industries
  • Mitsubishi
  • Rohr
  • AkzoNobel
  • Allied Signal

Related Component(s)

This product may be used in combination with some of the following products
TL-29
Thinner
CA-118
Curing Solution
Fetching the data, please wait...